Pump Impeller (Open / Semi-Open / Closed)
Pump Impeller (Open / Semi-Open / Closed) is a sand casting made to order by Lahore Casting at Mominpura Road, Wahga Town, Lahore 54000, Pakistan. It is poured in SG Iron (500/7), High Chrome Iron (15%/25% Cr), Stainless Steel (CF8M), in common sizes of 3"-18" OD (depends on pump model), weighing approximately 2-120 kg, with 2-4 mm machining allowance. Send a drawing or a sample part for a quote.
High-performance pump impellers designed for optimal efficiency. Available in open, semi-open, and closed configurations.
Specification
| Category | Pump, Water Works & Fluid Handling |
|---|---|
| Common sizes | 3"-18" OD (depends on pump model) |
| Approximate weight | 2-120 kg |
| Materials | SG Iron (500/7), High Chrome Iron (15%/25% Cr), Stainless Steel (CF8M) |
| Machining allowance | 2-4 mm |
| Casting process | Sand casting (green sand, resin-bonded sand, CO2 silicate or shell) |
| Finishes available | As-Cast, Shot Blasted, Fully Machined |
| Lead time | 3-7 working days for standard orders. No minimum order quantity. |
What your drawing should show
To quote a pump impeller (open / semi-open / closed) accurately we need: OD, vane count, vane thickness, suction eye dia, shaft bore + keyway, balance requirement.
A DWG, DXF, STEP, IGES or PDF drawing is enough. If there is no drawing, send a sample part and it will be reverse engineered.
Get a quote for this part
Other pump, water works & fluid handling castings
- Centrifugal Pump Casing (Volute Casing) — 8-250 kg
- Pump Back Plate / Casing Cover — 4-160 kg
- Wear Ring (Pump) — 1-20 kg
- Bearing Housing (Pump / Process Equipment) — 5-120 kg
- Stuffing Box / Gland Housing — 3-60 kg
All pump, water works & fluid handling castings · Full catalog of 40 standard castings